Parts List; Section 7 Parts List - Thermal Dynamics C-20A Cutskill Service Manual

SECTION 7:

PARTS LIST

General Information
This parts list covers the CutSkill ® Model C-20A Plasma Cutting Power Supply. Do not use these instructions or parts
on any other equipment.
Provide the power supply model number and serial number when ordering parts.
If a product must be returned for service, contact your distributor. Materials returned without proper authorization will
not be accepted.
Contact Information
Thermal Dynamics Technical Service Dept.
Tel: 1-800-752-7622 (1-800-PLASMA2)
Fax: 1-800-221-4401
e-mail address: tdc-tech@thermadyne.com
Replacement parts are shown on the following pages. Catalog numbers are shown below each part.
Manual 0-4697 7-1 Parts List