Section 5: Maintenance; General Maintenance - Thermal Dynamics C-20A Cutskill Service Manual

5.01 General Maintenance

Warning!
Disconnect input power before maintaining.
Visual check of
regulator and pressure
Visually inspect the torch body
tip, electrode and shield cup
Replace all
broken parts
Art # A-04929
Manual 0-4697

SECTION 5: MAINTENANCE

Each Use
Weekly
Visually inspect the
cables and leads.
Replace as needed
3 Months
Gas and
air lines
6 Months
Visually check and
Carefully clean the
interior
5-1
Visual check of
torch tip and electrode
Clean
exterior
of power supply
Maintain more often
if used under severe
conditions
Maintenance