Testing Failover And Failback Of The Agile Fusion Manager - HP IBRIX X9720 System Administrator Manual

For example:
[root@x109s1 ~]# ibrix_fm -f
NAME
------ ----------
X109s1 172.16.3.100
Command succeeded!
12. Install a passive agile Fusion Manager on a second file serving node. In the command, the
-F option forces the overwrite of the new_lvm2_uuid file that was installed with the X9000
software. Run the following command on the file serving node:
/ibrix/ibrixinit -tm -C <local_cluster_interface_device>
–v <agile_cluster_VIF_IP> -m <cluster_netmask> -d <cluster_VIF_device> -w 9009
–M passive -F
For example:
[root@x109s3 ibrix]# <install_code_directory>/ibrixinit -tm -C bond0 -v 172.16.3.1
-m 255.255.248.0 -d bond0:0 -V 10.30.83.1 -N 255.255.0.0 -D bond1:0 -w 9009 -M passive -F
NOTE:
fminstance.xml file. Run the following command:
grep –i current /etc/ibrix/fminstance.xml <property name="currentFmName" value="ib50-86"></property>
13. From the active Fusion Manager, verify that both management consoles are in the cluster:
ibrix_fm -f
For example:
[root@x109s3 ibrix]# ibrix_fm -f
NAME
------
x109s1
x109s3
Command succeeded!
14. Verify that the newly installed Fusion Manager is in passive mode:
ibrix_fm –i
For example:
[root@x109s3 ibrix]# ibrix_fm -i
FusionServer: x109s3 (passive, quorum is running)
=============================
Command succeeded
15. Enable HA on the server hosting the agile Fusion Manager:
ibrix_server –m
NOTE:
following error:
com.ibrix.ias.model.BusinessException: x467s2 is not associated with any power sources
Use the following command to define the iLO parameters into the X9000 cluster database:
ibrix_powersrc -a -t ilo -h HOSTNAME -I IPADDR [-u USERNAME -p PASSWORD]
See the installation guide for more information about configuring iLO.

Testing failover and failback of the agile Fusion Manager

Complete the following steps:
IP ADDRESS
Verify that the local agile Fusion Manager name is in the /etc/ibrix/
IP ADDRESS
----------
172.16.3.100
172.16.3.3
If iLO was not previously configured on the server, the command will fail with the
Testing failover and failback of the agile Fusion Manager 93