HP IBRIX X9720 System Administrator Manual page 24

NOTE: Enabling Phone Home removes any previous X9000 snmp configuration details and
populates the snmp configuration with Phone Home configuration details. When Phone Home is
enabled, you cannot use ibrix_snmpagent to edit or change the X9000 snmp agent
configuration. However, you can use ibrix_snmptrap to add trapsink IPs and you can use
ibrix_event to associate events to the trapsink IPs.
Registering Onboard Administrator
The Onboard Administrator is registered automatically.
Configuring the Virtual SAS Manager
On X9730 systems, the SNMP service is disabled by default on the SAS switches. To enable the
SNMP service manually and provide the trapsink IP on all SAS switches, complete these steps:
1. Open the Virtual SAS Manager from the OA. Select OA IP > Interconnet Bays > SAS Switch
> Management Console.
2. On the Virtual SAS Manager, open the Maintain tab, click SAS Blade Switch, and select SNMP
Settings. On the dialog box, enable the SNMP service and supply the information needed for
alerts.
Configuring the Virtual Connect Manager
To configure the Virtual Connect Manager on an X9720/X9730 system, complete the following
steps:
1. From the Onboard Administrator, select OA IP > Interconnet Bays > HP VC Flex-10 >
Management Console.
2. On the HP Virtual Connect Manager, open the SNMP Configuration tab.
3. Configure the SNMP Trap Destination:
Enter the Destination Name and IP Address (the CMS IP).
Select SNMPv1 as the SNMP Trap Format.
Specify public as the Community String.
4. Select all trap categories, VCM traps, and trap severities.
24 Getting started