Troubleshooting Upgrade Issues - HP IBRIX X9720 System Administrator Manual

indicators match. If you followed all instructions and the version indicators do not match,
contact HP Support.
6. Verify the health of the cluster:
<ibrixhome>/bin/ibrix_health -l
The output should show Passed / on.

Troubleshooting upgrade issues

Automatic upgrade fails
Check the upgrade.log file to determine the source of the failure. (The log file is located in the
installer directory.) If it is not possible to perform the automatic upgrade, continue with the manual
upgrade procedure.
ibrixupgrade hangs
The installation can hang because the RPM database is corrupted. This is caused by inconsistencies
in the Red Hat Package Manager.
Rebuild the RPM database using the following commands and then attempt the installation again.
Note that rm is followed by a space and then two underscores, and rpm is followed by a space
and then two dashes:
cd /var/lib/rpm
rm __*
rpm --rebuilddb
On the management console, ibrixupgrade may also hang if the NFS mount points are stale.
In this case, clean up the mount points, reboot the management console, and run the upgrade
procedure again.
Troubleshooting upgrade issues 123