Installing and maintaining the HP 3Gb SAS BL Switch
HP 3Gb SAS BL Switch Installation Instructions
HP 3Gb SAS BL Switch Customer Self Repair Instructions
On the Manuals page, click bladesystem > BladeSystem Interconnects > HP BladeSystem SAS
Interconnects.
Maintaining the X9700cx (also known as the HP 600 Modular Disk System)
HP 600 Modular Disk System Maintenance and Service Guide
Describes removal and replacement procedures. This document should be used only by persons
qualified in servicing of computer equipment.
On the Manuals page, click storage > Disk Storage Systems > HP 600 Modular Disk System.
HP websites
For additional information, see the following HP websites:
http://www.hp.com/go/X9000
http://www.hp.com
http://www.hp.com/go/storage
http://www.hp.com/support/manuals
http://www.hp.com/support/downloads
Rack stability
Rack stability protects personnel and equipment.
WARNING!
Extend leveling jacks to the floor.
Ensure that the full weight of the rack rests on the leveling jacks.
Install stabilizing feet on the rack.
In multiple-rack installations, fasten racks together securely.
Extend only one rack component at a time. Racks can become unstable if more than one
component is extended.
Product warranties
For information about HP product warranties, see the warranty information website:
http://www.hp.com/go/storagewarranty
Subscription service
HP recommends that you register your product at the Subscriber's Choice for Business website:
http://www.hp.com/go/e-updates
After registering, you will receive email notification of product enhancements, new driver versions,
firmware updates, and other product resources.
To reduce the risk of personal injury or damage to equipment:
HP websites 169