Deleting A Network Interface; Viewing Network Interface Information - HP IBRIX X9720 System Administrator Manual

ibrix_nic -r -n eth2:232 -h s2.hp.com -A -R gw.hp.com
Deleting a routing table entry
If you delete a routing table entry, it is not replaced with a default entry. A new replacement route
must be added manually. To delete a route, use the following command:
ibrix_nic -r -n IFNAME -h HOSTNAME -D
The following command deletes all routing table entries for virtual interface eth0:1 on file serving
node s2.hp.com:
ibrix_nic -r -n eth0:1 -h s2.hp.com -D

Deleting a network interface

Before deleting the interface used as the cluster interface on a file serving node, you must assign
a new interface as the cluster interface. See
To delete a network interface, use the following command:
ibrix_nic -d -n IFNAME -h HOSTLIST
The following command deletes interface eth3 from file serving nodes s1.hp.com and
s2.hp.com:
ibrix_nic -d -n eth3 -h s1.hp.com,s2.hp.com

Viewing network interface information

Executing the ibrix_nic command with no arguments lists all interfaces on all file serving nodes.
Include the -h option to list interfaces on specific hosts.
ibrix_nic -l -h HOSTLIST
The following table describes the fields in the output.
Field
BACKUP HOST
BACKUP-IF
HOST
IFNAME
IP_ADDRESS
LINKMON
MAC_ADDR
ROUTE
STATE
TYPE
When ibrix_nic is used with the -i option, it reports detailed information about the interfaces.
Use the -h option to limit the output to specific hosts. Use the -n option to view information for a
specific interface.
ibrix_nic -i [-h HOSTLIST] [-n NAME]
90 Maintaining the system
"Changing the cluster interface" (page
Description
File serving node for the standby network interface.
Standby network interface.
File serving node.
Network interface on this file serving node.
IP address of this NIC.
Whether monitoring is on for this NIC.
MAC address of this NIC.
IP address in routing table used by this NIC.
Network interface state.
Network type (cluster or user).
89).