Table of Contents
Advertisement
LOG INSTALLATION - VLOG24/VGB24
Step 1
Step 2
Place silica sand (NG only) or 1/4" small rock (LP only)
inside and in front of burner pan. Place 1" large rock in-
side, in front, and around the sides of the pan. Place
rock wool inside the middle of the pan and also in front
of the grate bar. Sprinkle vermiculite over top of lava
rock and rock wool.
Step 4
Place crossover logs #4 and #5 on top as shown.
This log set has the option to be reversed from a split look to a bark look or vice versa by turning the front logs and
crossover logs. Rear log #1 is not reversible.
Step 3
Place rear log #1 on the back of the grate & pull for-
ward toward guide pins. Place front logs #2 and #3 on
the front of the grate & pull forward.
Step 5
Place crossover logs #6, #7 and #8 on top as shown.
14
14
Advertisement
Table of Contents
