Table of Contents
Advertisement
LOG INSTALLATION - VLOG18/VSB18
Step 1
Step 2
Place silica sand (NG only) or 1/4" small rock (LP
only) inside and in front of burner pan. Place 1" large
rock inside, in front, and around the sides of the pan.
Place rock wool in front of center log support as
shown. Sprinkle vermiculite over top of lava rock and
rock wool.
Step 4
Place crossover logs #3 and #4 on top as shown.
Step 3
Place rear log #1 on the rear log supports. Place
front log #2 over top front and center log support.
Step 5
Place crossover logs #5 and #6 on tops as shown.
11
11
Advertisement
Table of Contents
