Table of Contents
Advertisement
LOG INSTALLATION - VLOG24/VGB18
Step 1
Step 2
Place silica sand (NG only) or 1/4" small rock (LP only)
inside and in front of burner pan. Place 1" large rock in-
side, in front, and around the sides of the pan. Place
rock wool in front of the grate bar. Sprinkle vermiculite
over top of lava rock and rock wool.
Step 4
Place crossover logs #4 and #5 on top as shown.
This log set has the option to be reversed from a split look to a bark look or vice versa by turning the front logs and
crossover logs. Rear log #1 is not reversible.
Step 3
Place rear log #1 on the back of the grate & pull for-
ward toward guide pins. Place front logs #2 and #3 on
the front of the grate & pull forward.
Step 5
Place crossover logs #6, #7 and #8 on top as shown.
12
12
Advertisement
Table of Contents
