LOG INSTALLATION - VLOG24/VSB18
Step 1
Step 2
Place silica sand (NG only) or 1/4" small rock (LP only)
inside and in front of burner pan. Place 1" large rock in-
side, in front, and around the sides of the pan. Place
rock wool in front of center log support as shown.
Sprinkle vermiculite over top of lava rock and rock
wool.
Step 4
Place crossover logs #4 and #5 on top as shown.
This log set has the option to be reversed from a split look to a bark look or vice versa by turning the front logs and
crossover logs. Rear log #1 is not reversible.
Step 3
Place rear log #1 on the rear log support. Place front
logs #2 and #3 on the front and center log support.
Step 5
Place crossover logs #6, #7 and #8 on top as shown.
13
13