Video Controller Pcb; Preparation For Removing The Video Controller Pcb; Removing The Video Controller Pcb - Canon i-SENSYS LBP5300 Series Service Manual

Chapter 3
3) Remove the DC controller PCB [1].
- 4 screws [2]

3.1.9 Video Controller PCB

3.1.9.1 Preparation for Removing the Video Controller
PCB
i-SENSYS LBP5300
1) Remove the network board. (page
Interface Board]
2) Detach the rear cover. (page 3-1)[Removing the Rear Cover]
3) Remove the fixing assembly. (page
Assembly]
4) Detach the upper cover. (page 3-2)[Removing the Upper Cover]
5) Detach the right cover. (page 3-1)[Removing the Right Cover]
3.1.9.2 Preparation for Removing the Video Controller
PCB
/ i-SENSYS LBP5360
1) Detach the rear cover. (page 3-1)[Removing the Rear Cover]
2) Remove the fixing assembly. (page
Assembly]
3) Detach the upper cover. (page 3-2)[Removing the Upper Cover]
4) Detach the right cover. (page 3-1)[Removing the Right Cover]

3.1.9.3 Removing the Video Controller PCB

i-SENSYS LBP5300
1) Remove the rear plate [1].
- 15 screws [2]
2) Remove the right rear plate [1].
- 2 screws [2]
3-8
F-3-53
F-3-54
3-10)[Removing the Network
3-25)[Removing the Fixing
3-25)[Removing the Fixing
F-3-55
3) Remove the USB board [1].
- 2 screws [2]
4) Move the video controller PCB [1] to the left and then remove it.
- 4 screws [2]
0013-9931
0014-8700 3.1.9.4 Removing the Video Controller PCB
/ i-SENSYS LBP5360
1) Detach the rear sheet metal (small) [1].
- 3 screws [2]
0013-9930
2) Disconnect the connector [1] of the CPU fan.
F-3-56
F-3-57
F-3-58
F-3-59
0014-8705