Removing The Cooling Fan; Duplex Fan; Preparation For Removing The Duplexing Fan; Removing The Duplexing Fan - Canon i-SENSYS LBP5300 Series Service Manual

Chapter 3

3.1.15.2 Removing the Cooling Fan

/ i-SENSYS LBP5360 / i-SENSYS LBP5300
1) Disconnect the connector [2] from the DC controller PCB [1].
2) Remove the cooling fan unit [1].
- 1 screw [2]
3) Remove the grounding spring [1].
4) Remove the exhaust fan [1].
- 6 claws [2]

3.1.16 Duplex Fan

3.1.16.1 Preparation for Removing the Duplexing Fan

/ i-SENSYS LBP5360 / i-SENSYS LBP5300
1) Remove the ETB unit. (page 3-15)[Removing the ETB Unit]

3.1.16.2 Removing the Duplexing Fan

/ i-SENSYS LBP5360 / i-SENSYS LBP5300
1) Detach the cable cover [1].
3-12
F-3-81
F-3-82
F-3-83
F-3-84
- 1 screw [2]
- 1 claw [3]
0013-9999
2) Remove the duplexing fan unit [1].
- 1 connector [2]
- 2 screws [3]
3) Detach the fan cover [1] and remove the duplexing fan.
- 3 claws [2]
0014-3521
0014-3522
F-3-85
F-3-86
F-3-87
F-3-88
F-3-89