Outline; Service Mode Table; Service Mode Items; Service Mode - Canon i-SENSYS LBP5300 Series Service Manual

Chapter 5

5.5.1.2 Outline

/ i-SENSYS LBP5360
Shifting to Service Mode
1) While holding down the Online key (a) and the Cancel Job key (b), turn on the power.
2) Press the Settings key (c) so that 'SERVICE MODE' is indicated.
3) Press the Enter key so that the group name appears. (Use the down arrow key to move to the next item.)

5.5.2 Service Mode Table

5.5.2.1 Service Mode Items

i-SENSYS LBP5300
Group
Service Chart Print
COunter Details
Service settings
Configuration Page Print B
Log Retention Settings
Printer Settings Restorration

5.5.2.2 Service Mode

/ i-SENSYS LBP5360
5-20
[2]
[b]
[a]
Description
Print of Service Chart Print 1
Print of Service Chart Print 2
Print of Service Chart Print 3
Use it to check the number of printed pages using respective toner
cartridges.
Charge Bias Use it to set the offset value for the Charge Bias.
Developing Bias Use it to set the offset value for the Developing Bias.
Attraction Bias Use it to set the offset value for the Attraction Bias.
Fusing Temperature Use it to set the fixing temperature.
Transfer Bias Use it to set the offset value for the transfer bias.
Print of configuration page print B
Output of Log file
When the DC controller PCB is exchanged, it rewrites it to NVRAM
of the DC controller PCB that exchanges the data of NVRAM
backed up to the video controller PCB.
F-5-21
F-5-22
T-5-11
[c]
Settings
-10 to +10
-10 to +10
-20 to +20
-4 to +4
Front side: -30 to +40
Back side: -40 to +30
Page-to-page Transfer Bias: -20 to
+50
0014-7044
0014-2917
0014-7045