Configuring Ftp; Figure 84 Remote Management: Telnet; Table 46 Remote Management: Telnet - ZyXEL Communications G-3000H User Manual

Figure 84 Remote Management: Telnet

The following table describes the labels in this screen.

Table 46 Remote Management: Telnet

LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Reset

12.5 Configuring FTP

You can upload and download the ZyAIR's firmware and configuration files using FTP,
please see the chapter on firmware and configuration file maintenance for details. To use this
feature, your computer must have an FTP client.
To change your ZyAIR's FTP settings, click REMOTE MGMT, then the FTP tab. The
screen appears as shown.
Chapter 12 Remote Management Screens
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyAIR using this
service.
A secured client is a "trusted" computer that is allowed to communicate with the
ZyAIR using this service.
Select All to allow any computer to access the ZyAIR using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyAIR using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
G-3000H User's Guide
DESCRIPTION
139