Layer-2 Isolation Example 3; Configuring Mac Filter; Figure 50 Layer-2 Isolation Example 3 - ZyXEL Communications G-3000H User Manual

8.2.4 Layer-2 Isolation Example 3

In the following example wireless clients 1 and 2 can communicate with B and C but not 3.
• Select the Enable Layer-2 Isolation check box.
• Configure more than one MAC address. Enter the server and your ZyAIR MAC
addresses in the Allow devices with these MAC addresses fields.

Figure 50 Layer-2 Isolation Example 3

8.3 Configuring MAC Filter

The MAC filter screen allows you to configure the ZyAIR to give exclusive access to up to 32
devices (Allow Association) or exclude up to 32 devices from accessing the ZyAIR (Deny
Association). Every Ethernet device has a unique MAC (Media Access Control) address. The
MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for
example, 00:A0:C5:00:00:02. You need to know the MAC address of the devices to configure
this screen.
To change your ZyAIR's MAC filter settings, click the WIRELESS link under ADVANCED
and the MAC Filter tab. The screen appears as shown.
Chapter 8 Other Wireless Configurations
G-3000H User's Guide
97