Wireless Lan Setup; Figure 109 Menu 3.2 Tcp/Ip Setup; Table 63 Menu 3.2 Tcp/Ip Setup - ZyXEL Communications G-3000H User Manual

G-3000H User's Guide

Figure 109 Menu 3.2 TCP/IP Setup

Follow the instructions in the following table on how to configure the fields in this menu.

Table 63 Menu 3.2 TCP/IP Setup

FIELD
IP Address
Assignment
IP Address
IP Subnet Mask
Gateway IP
Address
When you have completed this menu, press [
save your configuration, or press [

17.3 Wireless LAN Setup

Use menu 3.5 to set up your ZyAIR as the wireless access point. To edit menu 3.5, enter 3
from the main menu to display Menu 3 – LAN Setup. When menu 3 appears, press 5 and then
press [ENTER] to display Menu 3.5 – Wireless LAN Setup as shown next.
168
Menu 3.2 - TCP/IP Setup
IP Address Assignment= Static
IP Address= 192.168.1.2
IP Subnet Mask= 255.255.255.0
Gateway IP Address= 0.0.0.0
DESCRIPTION
Press [SPACE BAR] and then [ENTER] to select Dynamic to have the ZyAIR obtain
an IP address from a DHCP server. You must know the IP address assigned to the
ZyAIR (by the DHCP server) to access the ZyAIR again.
Select Static to give the ZyAIR a fixed, unique IP address. Enter a subnet mask
appropriate to your network and the gateway IP address if applicable.
Enter the (LAN) IP address of your ZyAIR in dotted decimal notation
Your ZyAIR will automatically calculate the subnet mask based on the IP address
that you assign. Unless you are implementing subnetting, use the subnet mask
computed by the ZyAIR.
Type the IP address of the gateway. The gateway is an immediate neighbor of your
ZyAIR that will forward the packet to the destination. On the LAN, the gateway must
be a router on the same network segment as your ZyAIR.
ENTER
ESC
] at any time to cancel.
] at the prompt "Press ENTER to Confirm..." to
Chapter 17 LAN Setup