Configuring Ftp; Www (Http And Https); Figure 68 Remote Management: Ftp; Table 38 Remote Management: Ftp - ZyXEL Communications G-3000 User Manual

11.3 Configuring FTP

You can use FTP (File Transfer Protocol) to upload and download the ZyXEL Device's
firmware and configuration files, please see
feature, your computer must have an FTP client.
To change your ZyXEL Device's FTP settings, click REMOTE MGMT > FTP. The screen
appears as shown. Use this screen to specify which interfaces allow FTP access and from
which IP address the access can come.

Figure 68 Remote Management: FTP

The following table describes the labels in this screen.

Table 38 Remote Management: FTP

LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Reset

11.4 WWW (HTTP and HTTPS)

You can set the ZyXEL Device to use HTTP or HTTPS (HTTPS adds security) for web
configurator sessions. Specify which interfaces allow web configurator access and from which
IP address the access can come.
G-3000 Series User's Guide
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
A secured client is a "trusted" computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
Chapter 11 Remote Management Screens
Chapter 23 on page 365 for details. To use this
129