Ftp - ZyXEL Communications NWA90AX User Manual

Figure 108 SSH Example 2: Test
$ telnet 192.168.1.2 22
Trying 192.168.1.2...
Connected to 192.168.1.2.
Escape character is '^]'.
SSH-1.5-1.0.0
Enter "ssh –2 192.168.1.2". This command forces your computer to connect to the Zyxel Device
2
using SSH version 1. If this is the first time you are connecting to the Zyxel Device using SSH, a message
displays prompting you to save the host information of the Zyxel Device. Type "yes" and press [ENTER].
Then enter the password to log in to the Zyxel Device.
Figure 109 SSH Example 2: Log in
$ ssh –2 192.168.1.2
The authenticity of host '192.168.1.2 (192.168.1.2)' can't be established.
RSA1 key fingerprint is 21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.2' (RSA1) to the list of known hosts.
Administrator@192.168.1.2's password:
The CLI screen displays next.
3

15.6 FTP

You can upload and download the Zyxel Device's firmware and configuration files using FTP. To use this
feature, your computer must have an FTP client. See
about firmware and configuration files.
To change your Zyxel Device's FTP settings, click Configuration > System > FTP tab. The screen appears
as shown. Use this screen to specify FTP settings.
Figure 110 Configuration > System > FTP
Chapter 15 System
NWA50AX/NWA90AX/NWA55AXE Series User's Guide
163
Chapter 17 on page 177 for more information