Ftp - ZyXEL Communications NWA Seres User Manual

Table 81 Configuration > System > TELNET (continued)
LABEL
Apply
Reset

17.8 FTP

You can upload and download the Zyxel Device's firmware and configuration files using FTP. To use this
feature, your computer must have an FTP client. See
about firmware and configuration files.
To change your Zyxel Device's FTP settings, click Configuration > System > FTP tab. The screen appears
as shown. Use this screen to specify FTP settings.
Figure 118 Configuration > System > FTP
The following table describes the labels in this screen.
Table 82 Configuration > System > FTP
LABEL
Enable
TLS required
Server Port
Server Certificate
Apply
Reset
Chapter 17 System
DESCRIPTION
Click Apply to save your changes back to the Zyxel Device.
Click Reset to return the screen to its last-saved settings.
DESCRIPTION
Select the check box to allow or disallow the computer with the IP address that matches the IP
address(es) in the Service Control table to access the Zyxel Device using this service.
Select the check box to use FTP over TLS (Transport Layer Security) to encrypt communication.
This implements TLS as a security mechanism to secure FTP clients and/or servers.
You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Select the certificate whose corresponding private key is to be used to identify the Zyxel Device
for FTP connections. You must have certificates already configured in the My Certificates
screen.
Click Apply to save your changes back to the Zyxel Device.
Click Reset to return the screen to its last-saved settings.
NWA/WAC/WAX Series User's Guide
Chapter 19 on page 205
188
for more information