Table 69 Menu 3.5.5 Layer-2 Isolation - ZyXEL Communications G-3000H User Manual

The following table describes the fields in this menu.

Table 69 Menu 3.5.5 Layer-2 Isolation

FIELD
Allow devices with
these MAC
addresses
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC
to cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
Chapter 17 LAN Setup
DESCRIPTION
These are the MAC address of a wireless client, AP, computer or router. A
wireless client associated with the ZyAIR can communicate with another
wireless client, AP, computer or router only if the MAC addresses of those
devices are listed in this table.Type the MAC addresses of the wireless client,
AP, computer or router that you want to allow the ZyAIR associated wireless
clients to have access to in these address fields. Type the MAC address in a
valid MAC address format, that is, six hexadecimal character pairs, for
example, 12:34:56:78:9a:bc.F
Note: The Block Intra-BSS Traffic changes from No to Yes
when you enable layer-2 isolation.
G-3000H User's Guide
179