Chapter 20 Snmp Configuration; Snmp Configuration; Figure 124 Menu 22 Snmp Configuration; Table 72 Menu 22 Snmp Configuration - ZyXEL Communications G-3000H User Manual

This chapter explains SNMP Configuration menu 22. See the web configurator chapter on
SNMP for background information.

20.1 SNMP Configuration

To configure SNMP, select option 22 from the main menu to open Menu 22 – SNMP
Configuration as shown next. The "community" for Get, Set and Trap fields is SNMP
terminology for password.
Figure 124
The following table describes the SNMP configuration parameters.

Table 72 Menu 22 SNMP Configuration

FIELD
SNMP:
Get Community
Set Community
Trusted Host
Trap:
Community

Chapter 20 SNMP Configuration

SNMP Configuration
Menu 22 SNMP Configuration
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Type the Get Community, which is the password for the incoming Get- and
GetNext requests from the management station.
Type the Set Community, which is the password for incoming Set requests from
the management station.
If you enter a trusted host, your ZyAIR will only respond to SNMP messages from
this address. A blank (default) field means your ZyAIR will respond to all SNMP
messages it receives, regardless of source.
Type the trap community, which is the password sent with each trap to the SNMP
manager.
C
H A P T E R
G-3000H User's Guide
2 0
185