Configuring Roaming; Table 65 Menu 3.5.1 Wlan Mac Address Filter - ZyXEL Communications G-3000H User Manual

G-3000H User's Guide
The following table describes the fields in this menu.

Table 65 Menu 3.5.1 WLAN MAC Address Filter

FIELD DESCRIPTION
Active To enable MAC address filtering, press [SPACE BAR] to select Yes and press [ENTER].
Filter Action Define the filter action for the list of MAC addresses in the MAC address filter table.
To deny access to the ZyAIR, press [SPACE BAR] to select Deny Association and press
[ENTER]. MAC addresses not listed will be allowed to access the router.
The default action, Allowed Association, permits association with the ZyAIR. MAC
addresses not listed will be denied access to the router.
MAC Address Filter
1..32 Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the client computers that are
allowed or denied access to the ZyAIR in these address fields.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to cancel" to
save your configuration or press [ESC] to cancel and go back to the previous screen.

17.3.2 Configuring Roaming

Enable the roaming feature if you have two or more ZyAIRs on the same subnet. Follow the
steps below to allow roaming on your ZyAIR.
1 From the main menu, enter 3 to display Menu 3 – LAN Setup.
2 Enter 5 to display Menu 3.5 – Wireless LAN Setup.
172 Chapter 17 LAN Setup