Resetting The Zyair; Methods Of Restoring Factory-Defaults; Navigating The Zyair Web Configurator - ZyXEL Communications G-3000H User Manual

2.2 Resetting the ZyAIR

If you forget your password or cannot access the web configurator, you will need to use the
RESET button on the side panel of the ZyAIR. This replaces the current configuration file
with the factory-default configuration file. This means that you will lose all configurations that
you had previously. The password will be reset to 1234.

2.2.1 Methods of Restoring Factory-Defaults

You can erase the current configuration and restore factory defaults in three ways:
Use the RESET button on the side panel of the ZyAIR to upload the default configuration file.
Hold this button in for about 10 seconds (the lights will begin to blink). Use this method for
cases when the password or IP address of the ZyAIR is not known.
Use the web configurator to restore defaults (refer to
Transfer the configuration file to your ZyAIR using FTP. See later in the part on SMT
configuration for more information.

2.3 Navigating the ZyAIR Web Configurator

We use the G-3000H web configurator in this guide as an example. The web configurator
screens for your model may vary slightly for different ZyAIR models.
The following summarizes how to navigate the web configurator from the MAIN MENU
screen.
Note: Follow the instructions you see in the MAIN MENU screen or click the
icon (located in the top right corner of most screens) to view online help.
The icon does not appear in the MAIN MENU screen.
Chapter 2 Introducing the Web Configurator
G-3000H User's Guide
Chapter 14 on page 149).
41