Initialization; Machine Initialization; How To Initialize The Terminal - Casio QT-6000 Service Manual

2. INITIALIZATION

2-1. MACHINE INITIALIZATION

2-1-1. How to initialize the terminal

Preparation:
1. All peripheral devices and terminals of this cluster should be turned off.
2. Connect all of the peripheral devices (such as printer, display etc.) to terminal.
3. Connect all terminals by inline.
Operation:
4. Turn on all peripheral devices of a terminal.
5. Turn on this terminal with pressing the initialze switch and release.
Copyright(C)2004
CASIO COMPUTER CO.,LTD.
All rights reserved.
ROM VER
CREATE xxxx-xx-xx xx:xx
QT-6000
APL VER.
6. After releasing the key, enter "20000" (U.S.), "10000" (other area: English), "40000" (other area:
German), "50000" (other area: French), "60000" (other area: Spanish) and press the OK key.
ID & IP ADDRESS
Terminal ID ENTER ID
DHCP USE
OK?
* The terminal ID of the DHCP server must be "1".
* The IP address of each terminal should be the unique number from 192.168. 0. 0 to 192.168.255.255.
C
xxxxxx xxxx
7
Version x.xx 4
xxxxxx xxxx
1
0
OK
——— Terminal ID: 1 - 32
——— If you do not use DHCP server, select "NO", and you have
to enter IP address of this terminal.
——— Press <YES> to continue.
INIT
8 9
5 6
2 3
— 5 —
Init Sw