To Install The Mcr - Casio QT-6000 Service Manual

6. Store the core in the main unit, and then fix it with fabric tape.

5-3. To install the MCR

1. Remove the REAR COVER for QT-6000 (No.1 to No.10 in the disassembly procedure).
2. Remove the packing from the main unit.
3. Insert the MCR into the special metal bracket.
NOTE: Be careful not to damage the FPC.
4. Connect the connector and fix the metal bracket with two screws.
NOTE: The lead wires should be stored neatly in a line.
— 25 —
FPC