Mcr Test - Casio QT-6000 Service Manual

[ 26 ] MCR test

[Function]
This is a card reader (MCR) test. The test enters the wait mode for only MCR input.
The test judges the result between OK and NG by the comparison between already set data and
read data.
[Operation]
Operation : 9
Press [ESC] key to end the test manually.
[LCD]
MCR1 indicates track 1 while MCR2 indicates track 2 in the display.
* Normally ended (both track 1 and 2)
MCR 96
MCR1 OK
MCR2 OK
END 96
* Error example
• The display shows error when the track 1 has an error.
The read data is displayed.
MCR1 ERR
**************************
******************************
• The track 1 ended normally. Only the track 2 has an error.
Only the data read in the track 2 is displayed.
MCR2 ERR **************************
**************
[PRINT]
MCR 96
MCR1 OK
MCR2 OK
END 96
6 ST
OK when the read data is correct.
— 48 —