Buzzer Test; Obr Test - Casio QT-6000 Service Manual

[ 24 ] Buzzer test

[Function]
This test will check the buzzer function.
Ring the one-shot buzzer.
[Operation]
Operation : n
n: 0 = One time check (can be omitted)
not 0 = Continuous check (To stop the test, press "ESC" key)
[LCD]
BUZZ n092
END n092
[PRINT]
BUZZ n092
END n092

[ 25 ] OBR test

[Function]
This is a scanner test. The test enters the wait mode for the scanner input, and waits only for scanner.
The test determines the result between OK and NG by comparing the fixed data and the read data.
Make sure to connect OBR (HHS-15) to COM 2.
* The fixed barcode is as follows.
[Operation]
Operation : 9
To stop the test, press "ESC" key.
[LCD]
OBR 95
OBR OK
OBR ERR xxxxxxxxxxxxxx
END 95
0 9 2 ST
5 ST
— 47 —
[PRINT]
OBR 95
OBR OK
OBR ERR xxxxxxxxxxxxxx
END 95