5. Fix EX-DP-UNIT-16 to the main unit with four screws.
6. Connect the cable to the main unit (COM3).
7. Fix the metal bracket which was removed in the above step 2.
To install Type B
1. Remove five screws at the bottom and then the metal
bracket.
2. Fix the metal bracket for type B to the main unit with double-
sided tape.
Position to be fixed: Align the metal bracket in the center of
the main unit and fix it where it is 1.0cm from the edge.
3. Connect the cable to EX-DP-UNIT-16.
4. Fix the main unit to the metal bracket for type B.
5. Connect the cable to the main unit (COM3).
6. Fix the metal bracket which was removed in the above step 1.
— 22 —