External Printer Print Test - Casio QT-6000 Service Manual

[ 15 ] External printer print test

[Function]
This test will check the print test for the RS232C I/F printer.
Connect the printer to the COM which is to be tested.
[Operation]
Operation : x1 x2 x3
X1:Print test pattern (0 = A pattern, 1 = B pattern)
X2:Port selection (1 = COM1, 2 = COM2, 3 = COM3, 4 = COM4, 5 = COM5, 6 = COM6)
X3:Baud rate selection (1 = 4800 bps, 2 = 9600 bps, 3 = 19.2 kbps)
n: 0 = One time check (can be omitted)
not 0 = Continuous check (To stop the test, press "ESC" key)
d: Printer type selection (1 = RJ, 2 = SLIP)
Note that some printers cannot use certain baud rates. Refer to the list below.
When changing the baud rate, make sure to change the setting for the printer also.
SLIP PRINTER (SP1300)
RJ PRINTER (UP250/350/360)
[LCD]
PRT xxxn03d
END xxxn03d
Error display
When the printer is not connected
NON PRINTER ERR
[PRINT]
Printing pattern is the following 2 types.
The number of lines : 40 lines for RJ and 35 lines for SLIP.
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
A pattern
n 0 3 d ST
19.2 Kbps 9600 bps 4800 bps
Ο
BBBBBBBBBBBBBBBBBBBBB
B pattern
— 40 —
Ο Ο
Ο Ο
*8,888,88