Server Controls And Indicators - IBM eServer 200 xSeries User Reference Manual

Server controls and indicators

The following section identifies the controls and indicators on the front and rear of
your server.
CD-eject button: Push this button to open the CD tray to insert or remove a CD.
CD-ROM drive activity light: When this light is on, the CD-ROM drive is in use.
Diskette-eject button: Push this button to release a diskette from the drive.
Diskette drive activity light: When this light is on, the diskette drive is in use.
Ethernet speed 100 MBps: When this light is on, the Ethernet speed is 100 MBps.
When the light is off, the Ethernet speed is 10 MBps. The Ethernet speed light is
located on the Ethernet (RJ-45) connector on the rear of the server.
Ethernet transmit/receive activity: When this light is on, there is activity between
the server and the network. The Ethernet transmit/receive activity light is located on
the Ethernet (RJ-45) connector on the rear of the server.
Hard disk drive activity light: When this light is on, the hard disk drive is in use.
Power-on light: This status indicator lights when you turn on your server.
Power-control button: Press this button to manually turn the server on or off.
See "I/O connector locations" on page 51 for the location of the input/output (I/O)
connectors on the rear of the server.
Ethernet speed 100 Mbps
Ethernet transmit/
receive activity
CD-eject
button
CD-ROM drive
activity light
Diskette-eject
button
Diskette drive
activity light
Hard disk drive
activity light
Power-on
light
Power-control
button
Chapter 1. Introducing the IBM xSeries 200
5