IBM eServer 200 xSeries User Reference Manual page 90

Code Function
415 Analog/digital
modem
76
IBM xSeries 200: User's Reference
Result
Not No modem was detected
applicable
PCI modem detected, but not enabled
Failed Modem reset failed
No dial tone detected
Text message Action
1. Verify that the
modem is properly
attached to the
system.
2. If the problem
remains, replace
the modem.
If the problem persists,
call for service.
1. Change the
configuration to
enable the modem.
2. If the problem
remains, replace
the modem.
If the problem persists,
call for service.
Replace the modem.
If the problem persists,
call for service.
1. Make sure that the
phone line attached
to the modem has a
dial tone. (Connect
a phone to the line
and listen, if
necessary.) If there
is no tone, have the
phone line
serviced.
2. If the problem
remains, replace
the modem.
If the problem persists,
call for service.