IBM eServer 200 xSeries User Reference Manual page 103

Table 15. NDIS (Windows NT) driver teaming messages for the Ethernet controller.
Event ID
07 Informational
08 Informational
09 Informational
10 Warning
11 Informational
12 Warning
13 Informational
14 Informational
15 Error
16 Informational
17 Informational
18 Informational
19 Informational
20 Informational
21 Warning
Type
Explanation: Team nn. Secondary adapter is initialized.
Action: None.
Explanation: Team nn. Virtual adapter or Team is initialized.
Action: None.
Explanation: Team nn. Primary adapter is switching over.
Action: None.
Explanation: Team nn. Adapter link down.
Action: Make sure the adapter is functioning properly.
Explanation: Team nn. Secondary adapter took over.
Action: None.
Explanation: Team nn. Secondary adapter is deactivated from the Team.
Action: Make sure the secondary adapter is functioning properly and that
the adapter cable is securely connected to the LAN.
Explanation: Team nn. Secondary adapter has rejoined the Team.
Action: None.
Explanation: Team nn. Secondary adapter link is up.
Action: None.
Explanation: Team nn. The last adapter has lost its link. Network connection
has been lost.
Action: Shut down the server and replace the adapters; then, restart the
server to reestablish the connection.
Explanation: Team nn. An adapter has reestablished the link. Network
connection has been restored.
Action: None.
Explanation: Team nn. Preferred primary adapter has been detected.
Action:None.
Explanation:Team nn. Preferred secondary adapter has been detected.
Action: None.
Explanation: Team nn. Preferred primary adapter took over.
Action: None.
Explanation: Team nn. Preferred secondary adapter took over.
Action: None.
Explanation: Team nn. Primary adapter does not sense any probes.
Possible reason: partitioned Team.
Action: Make sure the cables of the adapter team are connected to the
same LAN segment. Reconfigure the team if necessary.
Description
Chapter 6. Solving problems
89