IBM eServer 200 xSeries User Reference Manual page 86

Code Function
089 Microprocessor
72
IBM xSeries 200: User's Reference
Result
Failed Invalid microprocessor in slot xyz or BIOS setup
problem
(where xyz identifies the microprocessor that is
causing the error message)
Processor in socket id xyz is installed but not
functioning
(where xyz identifies the microprocessor that is
causing the error message)
Microprocessor in socket id xyz
(where xyz identifies the microprocessor that is
causing the error message)
Processor in socket id xyz is defective
(where xyz identifies the microprocessor that is
causing the error message)
Test setup error: Application microprocessor not
installed or BIOS setup problem
VRM corresponding to microprocessor in socket
xyz is defective
(where xyz identifies the microprocessor whose
VRM is causing the error message)
VRM corresponding to microprocessor in socket id
xyz is not installed
(where xyz identifies the microprocessor whose
VRM is causing the error message)
Text message Action
1. Check the system
error log for the
related error
messages.
2. If your system does
not have the latest
level BIOS code
installed, update
the BIOS code.
3. If the problem
remains, replace
the xyz
microprocessor and
run the test again.
If the problem persists,
call for service.
1. Reseat the
microprocessor.
2. If the problem
remains, replace
the microprocessor.
If the problem persists,
call for service.
Replace the
microprocessor.
If the problem persists,
call for service.
1. Verify that the
Application
microprocessor is
installed and seated
correctly.
2. If your system does
not have the latest
level BIOS code
installed, update
the BIOS code.
3. If the problem
remains, replace
the Application
microprocessor and
run the test again.
If the problem persists,
call for service.
Replace the VRM.
If the problem remains,
call for service.
Install a VRM.
If the problem persists,
call for service.