Table of Contents
Advertisement
To remove I/O expansion boards
Installing Function Expansion Boards
About installation locations
9
Using the four screws removed in step 1, attach the board tray stabilizers.
Carry out the installation procedure in reverse.
Pull the standard I/O module out from the rear panel of the processor unit, and
install the function expansion boards on the standard I/O module. Insert the
expansion board connectors into the sockets on the standard I/O module and
secure them with the screws supplied with the expansion boards. Connect the
BKDF-940 to the DME1 and DME2 sockets, and connect the BKDF-950 to the
MV1 and MV2 sockets.
Function
Socket on standard I/O module
expansion
DME1 socket DME2 socket
board
BKDF-940 2CH
Yes
DME Board
BKDF-950 Multi
No
Viewer Board
Yes: Can be installed No: Cannot be installed
MV1 socket
Yes
No
No
Yes
Installing Optional Expansion Boards
MV2 socket
No
Yes
45
Advertisement
Table of Contents
