Table of Contents
Advertisement
3
Use the following procedure to remove the panels on the expansion board
installation tray.
1Remove the two screws (+M3) securing the ventilation adjustment panel,
and remove the ventilation adjustment panel.
2Remove the two screws (+M2.6) securing the blank panel where you
want to install an I/O expansion board, and remove the blank panel.
Notes
• Do not discard the panels. Retain them for future use. If you remove an I/
O expansion board, you will need to reattach the blank panel. If you
remove all I/O expansion boards, reattach the ventilation adjustment
panel.
• Use the screws that secured the blank panel to secure the I/O expansion
board. For details, see step 5. Keep the screws that secured the ventilation
adjustment panel together with the ventilation adjustment panel.
Installing Optional Expansion Boards
41
Advertisement
Table of Contents
