Table of Contents
Advertisement
3Remove the adhesive surface cover sheet from the top side of the
heat transfer sheet.
(For input expansion boards)
(For output expansion boards)
5
Push the connectors of the expansion board through the inner side of the
connector name plate frame, place the expansion board on the expansion
board installation tray, and secure the board with the supplied four +M3
screws.
Notes
• Use a torque screwdriver to tighten the screws. Set the tightening torque
to 0.59 N·m.
• For the installation positions of expansion boards, see page 38.
6
Use the following procedure to attach the connector name plate supplied
with the expansion board.
1Using the screws (see the following table) supplied with the expansion
board, secure the connector name plate to the expansion board.
Installing Optional Expansion Boards
43
Advertisement
Table of Contents
