Inserting Downstream Keys (With A Mix) - Sony DFS-900M Operating Instructions Manual

1
Set up the key signal.
For information about how to set up keys, see "Setting
Up Keys" (page 121).
2
In the transition block (when using the BKDF-901) or
in the DSK/fade to black control block (when using the
BKDF-902), press the DSK1 ON or DSK2 ON button.
The pressed button lights, and a downstream key is
inserted.
Press the button again to delete the downstream key
and turn the button off.
Inserting Downstream Keys (with a
Mix)
BKDF-901
BKDF-902
1
Set up the key signal.
For information about how to set up keys, see "Setting
Up Keys" (page 121).
2
Set the transition rate for downstream keys.
For information about how to set transition rates, see
"Setting Transition Rates" (page 116).
3
Press the DSK1 or DSK2 AUTO TRANS button.
The transition is executed at the specified transition
rate.
Note
Some functions cannot be used with downstream keys.
Functions that are not available include chroma key, wipe
patterns, DME wipe patterns, key masks (but box mask is
available), and edges.
Using Keys to Compose Video
129