Sony DFS-900M Operating Instructions Manual page 98

98
Basic Switcher Settings
Notes
• When optional input expansion boards have been installed, signal names
corresponding to the installation positions appear for IN09 to IN24. For
details, see page 38.
• When the display names of input signals or internal signals have been
changed (see page 73), the user-specified names appear.
7
Repeat steps 5 and 6 to set other child windows.
8
Rotate the F4 knob to turn display of the child window titles on or off.
On: Display titles.
Off: Do not display titles.
Notes
• The settings made in step 8 are reflected in all child windows. It is not
possible to make title display settings separately for individual windows.
• The display of child window titles is turned off automatically when you
change the multi-view window partition type. If you want to display titles,
turn title display on again.
Multi-view window partition types and child window numbers
To adjust the display positions and sizes of child window titles
1
Carry out steps 1 to 6 of the procedure in "Changing signal display names"
(page 73) to load a list file output by the control panel (dfs900.ini) into a
computer.
2
Use Notepad or another text editor to edit the parameter values (the values
after the equals signs) in the [MVParam] section of the dfs900.ini file.
Parameter Description
LargeOffsetV Specifies the vertical display position in
large child windows.
LargeOffsetH Specifies the horizontal display
position in large child windows.
LargeWidth Specifies the display width in large
child windows.
Setting values
0 to 50
0 to 50
0 to 50