Table of Contents
Advertisement
96
Basic Switcher Settings
You can install up to two BKDF-950 boards, and set output patterns for each
board in both the MV1 Window and MV2 Window sub menus.
You also change the size and position of child window titles, and add frames to
indicate that the signal assigned to a child window is program or preview output
or a component element of program or preview output (the currently selected
input, a key signal, and so on).
For details about the BKDF-950 and information about how to install it, see
page 45.
Note
The MV1 Window and MV2 Window sub menus cannot be set if the
BKDF-950 board is not installed.
To specify the partition type and assign output video to child
windows
BKDF-902
1
When using the BKDF-901: If the SHIFT button of the DME/SETUP
block is not lit, press it to light it.
When using the BKDF-902: Skip to step 2.
2
Press the MV button.
A settings sub menu of the MV (multi-view output settings) sub menu
appears in the display panel.
Preview video
Program video
Multi-view screen example (10 partitions)
BKDF-901
Advertisement
Table of Contents
