Status Information; To Display The Status Sub Menus - Sony DFS-900M Operating Instructions Manual

To update the system
In the Update sub menu, adjust the following parameters,
and then execute the operation.
Knob Parameter Description
F1 CP Update the
control panel
software.
F3 TG Update firmware. DSP, CPU,
F4 Cursor Turn the GUI
menu cursor on
or off.
a) Reserved for future expansion
To display or hide the GUI menu cursor
Press the F4 knob and hold it down for one second or
longer.
To update the software from the Update sub
menu
For information about software updates contact a Sony
service representative.

Status Information

Settings
The Status sub menu of the Setup menu allows you to
– check alarms, software versions, and the status of the
option boards installed in the switcher.
Main_IO, XPT,

To display the Status sub menus

KEYER, Comb,
DME, MV, SDI_I,
SDI_O
a) a
AI , AO ),
a) a)
DVI_I , DVI_O
–
1
2
3
BKDF-901
BKDF-902
When using the BKDF-901: If the SHIFT button of
the DME/SETUP block is not lit, press it to light it.
When using the BKDF-902: Skip to step 2.
Press the STATUS button.
The most recently used sub menu appears in the
display panel.
Press the h and H buttons in the numeric keypad
until the desired sub menu appears.
169
Status Information