Adding Borders To Images - Sony DFS-900M Operating Instructions Manual

Change aspect in the X axis direction
Change aspect in the Y axis direction
Change aspect in the Z axis direction
Operation Knob
Specify an F2
aspect in the X
axis direction.
Specify an
F3
aspect in the Y
axis direction.
Specify an F4
aspect in the Z
axis direction.
Crop sub menu parameters
You can crop the top, bottom, left, and right edges of
images by specified amounts. To do so, adjust the
following parameters.
Crop width
136
Customizing DME Effects
Change aspects
Parameter Settings
X (Aspect X) 0.000 to 8.000
Y (Aspect Y) 0.000 to 8.000
Z (Aspect Z) 0.000 to 8.000
Crop width
Crop example
Operation Knob
Specify the crop F1
width for the left
side.
Specify the crop F2
width for the right
side.
Specify the crop F3
width for the top
side.
Specify the crop F4
width for the
bottom side.
Setup sub menu parameters
Set the following parameters.
Operation Knob
Enable or disable F1
DME (same
function as the
DME ENABLE
button in the
KEYER block
(see page 13)).
Enable or disable F2
global
c)
coordinates.
a) When you are setting up a transition
b) When you are setting up a key
c) Not available in this version

Adding Borders to Images

Use the sub menus of the Border sub menu to do the
following.
Sub menu Operation
a) Select whether to add a border
xxx Border Color
to an image, and adjust the color
(Border Color)
of the border, if added.
b) Adjust the widths of the inner
M/E DME Inner Width ,
sides of the border.
c)
Keyer Bord Inner Wid
(Inner Width)
Adjust the widths of the output
b)
M/E DME Outer Width ,
sides of the border.
c)
Keyer Bord Outer Wid
(Outer Width)
b) Adjust the softness of the inner
M/E DME Border Soft ,
and outer sides of the border.
c)
Keyer Bord Softness
(Softness)
Parameter Settings
L (Left Side) 0.0 to 100.0
R (Right Side) 0.0 to 100.0
T (Top Side) 0.0 to 100.0
B (Bottom 0.0 to 100.0
Side)
Parameter Settings
Off: Disable
DME
DME
On: Enable
a)
DME
On-woK:
Disable DME
b)
for keys
On-w/K: Enable
DME for
b)
keys
On: Enable
Glbl (Use
Off: Disable
Globals)