Table of Contents
Advertisement
Connecting Hardware Devices
Replacing the Internal Battery
1
Observe the safety and ESD precautions at the beginning of this chapter, and the
additional cautions given here.
2
Remove the server access cover.
3
Insert the tip of a small flat bladed screwdriver, or equivalent, under the tab in the
plastic retainer.
4
Gently push down on the screwdriver to lift the battery.
5
Remove the battery from its socket.
6
Dispose of the battery according to local ordinance.
7
Remove the new lithium battery from its package and, being careful to observe the
correct polarity, insert it in the battery socket
.
Removing the battery
8
Reinstall the plastic retainer on the battery socket.
9
Reinstall any expansion cards you removed.
10
Reinstall the access cover, reconnect all signal and power cables, then turn on the
server. For instructions, read the
Maintenance Overview
Internal Battery
on page 50.
71
Advertisement
Table of Contents
