Table of Contents
Advertisement
Hardware Diagnostics
❖
04. Caching data test
Sends invalid data to the cache to verify that the cache controller recognizes it as
invalid.
When this Cache test is selected, the following screen displays:
Use the arrow keys to select the following:
- 01. Go to Test
Starts the test. To stop, press Ctrl + Break.
- 02. Test Loop
Press Enter to toggle between YES and NO.
YES increments the pass counter each time the test cycle ends and restarts the test
cycle.
NO returns the subtest menu to the Main menu after the test is completed.
- 03. Error Stop
Press Enter to toggle between YES and NO.
YES increments the pass counter each time the test cycle ends and restarts the test
cycle.
NO returns the subtest menu to the Main menu after the test is completed.
123
01. Diagnostic Test
Advertisement
Table of Contents
