Table of Contents
Advertisement
Hardware Diagnostics
11. SAF-TE Test
Tests the SCSI drive bay.
1
Use the arrow keys to highlight 11. SAF-TE Test on the Diagnostic Test menu.
2
Press Enter.
The following screen displays:
3
Using the arrow keys, select the SAF-TE test.
❖
01. SAF-TE test
Detects the SAF-TE controller and checks the operation by flashing the LED for
each hard disk drive.
When the SAF-TE test is selected, the following screen displays:
Use the arrow keys to select the following:
- 01. Go to Test
Starts the test. To stop, press Ctrl + Break.
- 02. Test Loop
Press Enter to toggle between YES and NO.
128
01. Diagnostic Test
Advertisement
Table of Contents
