Table of Contents
Advertisement
Getting Started
Recommended Tools
To mount components in a rack, Toshiba suggests that you have these tools:
Tool
Small and large Phillips
screwdrivers
Small and large flat-blade
screwdriver
Multimeter
Antistatic wrist strap
Toshiba-Supplied Hardware Items
The following table lists the hardware items that Toshiba provides with your server.
Hardware item
M5 x 12 screw
M5 star washer
M5 flat washer
Inside Rail
Outer and Middle Rail
Piece
Front & Rear Rail Bracket
Pair
Nutbar
To tighten M3, M4, and M6 mounting hardware screws
To install and remove screws on the installed components
To check wiring continuity
To protect sensitive electronics
Qty
12
Use to secure the base rail to the
rack's vertical rails.
8
Use to secure the base rail to the
rack's vertical rails.
8
Use to secure the base rail to the
rack's vertical rails.
2
Chassis Rail: attaches to 3135R
chassis (one left, one right).
2
Rack rail: attach to rack mounts.
Chassis rail slides into this rail (one
left, one right).
2
Rack-to-Rail connecting bracket
pairs (left front/right front, left rear/
right rear)
4
Rack-to-Rail Nutbar: connects rack-
to-rail connecting brackets to the
rack.
Stabilizing the Rack
Use
Use
38
Advertisement
Table of Contents
