Table of Contents
Advertisement
System Configuration Setup
Memory Configuration
The following submenu appears:
System Memory
Displays available system memory.
Extended Memory
Displays system extended memory.
DIMM Group #1 Status: Normal
Displays the status of DIMM group #1.
DIMM Group #2 - #4 Status: None
Displays the status of DIMM groups #2 - #4.
Clears DIMM Errors
Sets the clear DIMM errors feature.
DIMM Error Pause: Enabled
Specifies whether to enable or disable the DIMM error pause feature.
Peripheral Configuration
The following submenu appears:
Serial Port 1: 3F8, IRQ4
Sets the I/O port address and interrupt level for Serial Port 1.
Serial Port 2: 2F8, IRQ3
Sets the I/O port address and interrupt level for Serial Port 2.
Parallel port:378, IRQ7
Sets the I/O port address and interrupt level for the parallel port.
Parallel Mode: Output Only
Sets the operation mode for the serial port; select "Output Only."
Diskette Controller: Enabled
Sets whether the built-in floppy disk controller is to be enabled or disabled.
88
BIOS Setup Utility
Advertisement
Table of Contents
