Hardware Diagnostics
❖
03. RAM Refresh
Writes test data to the memory, then reads the data after one refresh cycle,
comparing the data with the test data.
When this memory test is selected, the following screen displays:
Use the arrow keys to select the following:
- 01. Go to Test
Starts the test. To stop, press Ctrl + Break.
- 02. Test Loop
Press Enter to toggle between YES and NO.
YES increments the pass counter each time the test cycle ends and restarts the test
cycle.
NO returns the subtest menu to the Main menu after the test is completed.
- 03. Error Stop
Press Enter to toggle between YES and NO.
YES increments the pass counter each time the test cycle ends and restarts the test
cycle.
NO returns the subtest menu to the Main menu after the test is completed.
103
01. Diagnostic Test