Table of Contents
Advertisement
Software Installation
Windows 2000 Server
At the time of publication, the drivers on the Microsoft Windows 2000 Server installation
CD were the latest drivers available for the hardware supplied with the Magnia 3135R
Server with the exception of the MegaRAID driver for the optional Express 500 RAID
card.
To setup your server's hardware configuration, please refer to the Magnia 3135R User's
Guide, available in the \Docs folder on the Magnia 3135R Software and Documentation
CD.
Please plan and initiate the Microsoft Windows 2000 Server installation using the
documentation that came with the installation CD.
Express 500 RAID Controller
To select the driver for the RAID controller:
1
Press F6 when the following Setup message appears on the DOS screen: "Setup is
inspecting your computer's hardware configuration."
2
When the message "Specify additional SCSI adapters" is displayed, select
S=Specify Additional Device.
3
Highlight "Other" on the next screen, and insert the floppy disk labeled "MegaRAID
W2K".
4
Press Enter.
5
When a list of drivers appears on the screen, select "MegaRAID Express 500;
Enterprise 1600; Elite 1600 RAID Controller Driver" and press Enter.
6
Follow the screen prompts to finish the installation.
NOTE: If the RAID Controller is installed on the server, be sure to install the Power
Console Plus application after installing Windows 2000 Server. For more detailed
information see the RAID Controller user's guide.
149
Windows 2000 Server
Advertisement
Table of Contents
