Controls And Indicators; Operation Buttons - Toshiba Magnia 3135R User Manual

Getting Started

Controls and Indicators

The front panel contains four operation control buttons and seven system indicator LEDs.

Operation Buttons

Power Button
Operation buttons
Power button - Press this button to power-down the server. Placing the server in
security mode disables the power button. To power-down the server while it is in secure
mode, the user must have shutdown rights. To reactivate the power button, enter your
user password.
TECHNICAL NOTE: The procedure for shutting down the server depends on the
operating system installed on the server. For more information on turning the server
on and off, see
Sleep button - Toggles the server between normal operation mode and power-saving
mode (sleep mode). Placing the server in secure mode disables the sleep button. To
place the server in sleep mode while in secure mode, you must have sleep rights. To
reactivate the sleep button, enter your user password.
Reset button - Restarts the server. Placing the server in security mode disables the
Reset button. To re-enable the Reset button, enter your user password.
CAUTION: To avoid data loss or corruption, never use the Reset button while the
activity indicator on the floppy disk drive, CD-ROM drive, or hard disk drive is on.
NMI button - This is a system control button, to be used by authorized Toshiba Service
personnel only.
Turning on the Server
Sleep Button
on page 45.
Front Panel
Reset Button
NMI Button
23